I'm a
7060 Mounting System for Single Bar Towel Rails
W110xH1000xD10mm
$215.00 RRP
In Stock
The Thermorail SRMS mounting system is designed to simply the process of installing multiple single electric heated towel rails. The mounting system is installed in the wall prior to it being sheeted with the fixing spigots and rail leads installed. The wall is then sheeted and tiled leaving the mounts and cables protruding from the wall as the fixing point of the rails on the right hand side.
The mounting system ensures an even spacing between the rail, provides a stronger fixing point for the rail and allows the wiring to be put in the correct position prior to the wall being sheeted. This will save valuable installation time on site and ensure an overall better installation. Whilst the mounting system is not mandatory for the install of single heated bathroom towel rails it is recommended especially if multiple rails are going to be installed to create a design statement in the bathroom.
The mounting system is not suitable for use with the vertical heated towel rails.
SRMS Thermorail Mounting System - 1000x110x10mm
Product Code
7060
Size
1000x110x10mm
Do I need to order a mounting system?
No, the single bar rails have all the parts needed for installation however the mounting system is recommended when installing multiple bars as it makes it easier for the cable management and spacing.
Do I need a mounting system for both sides of the Single Bar Rail?
No, in most applications only one mounting system is required per set of Single Bar Rails. The mounting system is installed on the right-hand side, where the wiring is, to allow for easier pre-wiring and rail spacing. On the left-hand, non-wired side, the rail has a mount which is screwed into the stud, level with the right-hand side.