I'm a
VSH900HBB Brushed Brass 240Volt Vertical Single Heated Rail
W142xH900xD100mm
$435.00 RRP
In Stock
A Heated Towel Rail is an affordable luxury for every bathroom. The Thermorail Vertical Heated Towel Rails are designed to help dry your towel and create a design statement in your bathroom particularly in bathrooms with limited wall space. The brushed brass finish of the VSH900HBB matches perfectly in with your brushed brass tapware.
The VSH900HBB is a 240V Vertical Heated Towel Rail, this means a transformer is not required and the rail connects directly into the 240V power. This provides an easier install process and eliminates any potential issues that can be associated with transformers.
All Thermorail vertical heated towel rails include an optional towel hook which can be fitted on the rail at the time of install. This hook allows for the towel to be more easily hung over the vertical rail. Whilst the vertical rail will assist in drying your towel, it does have less surface contact than a ladder rail and therefore will be less effective in drying and warming your towel than a ladder.
We also recommend the use of a timer to control the rails and save on running costs.
One towel per bar recommended.
Product Code
VSH900HBB
Output
20Watts
IP Rating
IP65
Warranty
7yrs
Lead Length
2m
Voltage
240Volt
No of Bars
1
Wiring Type
Concealed (hardwired)
Wiring Position
Top or bottom mounting position
Distance Between Mounting Points (Top to Bottom)
780mm
Finish
Brushed Brass PVD
PLEASE NOTE: Specifications are for information purposes only. Whilst every effort has been made to ensure the product specifications are accurate, due to continuing product development and improvement the specifications are subject to change. Specifications can be used to rough in and fit timber supports in the wall however we recommend no holes are drilled without having the product on site or verifying the details with the manufacturer. Thermogroup cannot be held liable or responsible for errors due to updated specifications.
Do the vertical heated towel rails require an in-wall mounting system or can they be retrofitted?
Our vertical heated towel rails do not require an in-wall mounting system for installation, and come supplied with a transformer and all required mounts to complete the install. Therefore, provided that your electrician is able to get power down to the mounting points, it is possible for you to retrofit the vertical heated towel rails to an existing tiled wall.
What temperature does a Vertical Towel Rail get to?
As with most Thermorail Heated Towel Rails, the Vertical Rails heat to around 35 degrees without a towel. When a towel is placed over the bars the towel insulates the rail and absorbs the heat, meaning that beneath the towel the temperature will rise to between 50 – 55 degrees.
Do I require a transformer?
No, these rails are part of our 240Volt range which means no transformer is required, they wire directly into the incoming power supply.
What is the recommended spacing when installing two or more vertical rails?
The spacing of the vertical rails is really up to your individual preference. Generally, we would recommend around 200mm apart as a good spacing for these rails, however this is a guide only and some wish to have the rails closer or further apart which is fine. If you choose to have the hooks installed on one or more of the rails, you will also need to take this into account with the spacing, as this adds to the total width.
Can I wire multiple rails to one timer?
Yes, absolutely, you can connect more than one heated towel rail to a single timer. There are just a few things to consider; You cannot exceed the load rating of the timer (this varies from 1 amp to 16 amps depending on the timer), and all the rails wired to one timer will be on at the same time, they cannot be set on individual schedules. The addition of a timer makes your life simple and rewarding with warm towels everyday and wiring multiple rails to one timer allows you to achieve this result easily and beautifully.