Thermonet 200W/m² In Screed Heating Kit with Wi-Fi Thermostat

In Screed Heating

Thermonet 200Watt mats are the ideal option for in screed applications providing easy installation and efficient storage heating in screed layers of 20-50mm.

In Screed heating will take longer to heat up, however the screed layer acts as a heat bank and holds the heat for longer, ensuring you don’t have added running costs. In Screed heating allows the tiler flexibility in creating falls in wet areas and can be installed under most floor coverings. It is recommended to insulate under floor heating to gain maximum performance from your system.

Full kit ready for installation

The Thermonet 200W/m² matting is available in a kit which includes all the items (except insulation) that you will require for installation of your underfloor heating.

Kit items include:  Thermonet 200W/m² Mat, Wi-Fi Thermostat (5235W), Floor Temperature Sensor, Sensor Conduit, Fixing Tape, Cable Monitor (6025) & Installation Guide & Warranty Form.

 

 

  • Lifetime Warranty

    We are so confident of the quality of our Thermonet Underfloor Heating systems, made in the United Kingdom, that we give each system a warranty that lasts a Lifetime with 3 year warranty on our Thermostats.

  • In Screed heating

    Suitable for installation in screeds of 20mm to 50mm, and is recommended to be fixed to insulation boards.

  • TwistedTwin cable on Full self adhesive mesh

    The unique stress free cable construction creates a longer lasting heating cable with zero electromagnetic field (Zero EMF). The self adhesive mesh speeds up installation by holding Thermonet matting to the substrate for easy self levelling and tile fixing.

  • Ideal for areas with limited floor space

    Thermonet 200 Watt mats are ideal for rooms with limited floor space for the heating mat. The 200 watt ensures a high heat output across the floor warming the entire room.

  • Perfect for high heat loss applications

    The high heat output of the 200 Watt mats makes them perfect for rooms which are prone to high heat loss. This can be further reduced by adding a layer of insulation below the heating.

Select heating kit to fit your space

Thermonet 200W/m² TWF Kits

Stock No.
112002TWF
Size
2 x 0.5m
Area
1m²
Output
200 W
Resistance
265 Ω
Price
$635.00
Stock Status
In Stock
Stock No.
112003TWF
Size
3 x 0.5m
Area
1.5m²
Output
300 W
Resistance
176 Ω
Price
$714.00
Stock Status
In Stock
Stock No.
112004TWF
Size
4 x 0.5m
Area
2m²
Output
400 W
Resistance
132 Ω
Price
$794.00
Stock Status
In Stock
Stock No.
112005TWF
Size
5 x 0.5m
Area
2.5m²
Output
500 W
Resistance
106 Ω
Price
$870.00
Stock Status
In Stock
Stock No.
112006TWF
Size
6 x 0.5m
Area
3m²
Output
600 W
Resistance
88 Ω
Price
$950.00
Stock Status
In Stock
Stock No.
112007TWF
Size
7 x 0.5m
Area
3.5m²
Output
700 W
Resistance
76 Ω
Price
$1,030.00
Stock Status
In Stock
Stock No.
112008TWF
Size
8 x 0.5m
Area
4m²
Output
800 W
Resistance
66 Ω
Price
$1,100.00
Stock Status
In Stock
Stock No.
112009TWF
Size
9 x 0.5m
Area
4.5m²
Output
900 W
Resistance
59 Ω
Price
$1,170.00
Stock Status
In Stock
Stock No.
112010TWF
Size
10 x 0.5m
Area
5m²
Output
1000 W
Resistance
53 Ω
Price
$1,240.00
Stock Status
In Stock
Stock No.
112011TWF
Size
11 x 0.5m
Area
5.5m²
Output
1100 W
Resistance
48 Ω
Price
$1,260.00
Stock Status
In Stock
Stock No.
112012TWF
Size
12 x 0.5m
Area
6m²
Output
1200 W
Resistance
44 Ω
Price
$1,280.00
Stock Status
In Stock
Stock No.
112013TWF
Size
13 x 0.5m
Area
6.5m²
Output
1300 W
Resistance
41 Ω
Price
$1,340.00
Stock Status
In Stock
Stock No.
112014TWF
Size
14 x 0.5m
Area
7m²
Output
1400 W
Resistance
38 Ω
Price
$1,410.00
Stock Status
In Stock
Stock No.
112016TWF
Size
16 x 0.5m
Area
8m²
Output
1600 W
Resistance
33 Ω
Price
$1,540.00
Stock Status
In Stock
Stock No.
112018TWF
Size
18 x 0.5m
Area
9m²
Output
1800 W
Resistance
29 Ω
Price
$1,670.00
Stock Status
In Stock
Stock No.
112020TWF
Size
20 x 0.5m
Area
10m²
Output
2000 W
Resistance
26 Ω
Price
$1,800.00
Stock Status
In Stock
Stock No.
112024TWF
Size
24 x 0.5m
Area
12m²
Output
2400 W
Resistance
22 Ω
Price
$2,060.00
Stock Status
In Stock
Thermonet heating mats are also available in kits including standard thermostat (5220A), and dual thermostat (5245) or as heating mats only

Technical Data

Width
500mm
Heated width
430mm
Max. thickness
3.5mm
Max. temperature*
28°C *
Protection Rating
IP68
Warranty
Lifetime on heating mat and 3 years on thermostat
Voltage
240Volt
Wattage
200W/m²
Conductor Type
Single Ended
Cold Tail Length
5m
* Regulated by floor sensing thermostat

Frequently Asked Questions


What is the minimum and maximum thickness for In Screed Heating?

In Screed Heating is designed to be installed in screed layers between 20-100mm.

How does the heat-up time of In Screed heating compare with Undertile heating?

In a typical Undertile build-up the floor heating will take 2-4hours to reach temperature and for In Screed heating cable under a 25mm of screed it would also take approx. 2-4hours. However, for every additional 25mm of screed you will need to allow an additional hour for the heat to penetrate.

Is Underfloor Heating safe to be installed in the shower?

Providing that the shower floor is tiled (not a shower base) like the rest of the bathroom floor, all of Thermogroup’s underfloor heating systems are suitable for installation in the shower area.

The cable has an IP (Ingress Protection) rating of IP68 and a continuous earth braid the full length of the cable. This ensures it is safe should the cable come in contact with water and gives you the assurance of safety in the unlikely event of install damage. For further protection we recommend that you do not end the heating system in the shower area.

Can Underfloor Heating be installed up the side and on top of a shower seat?

All Underfloor Heating cable must be covered by a cement-based product and cannot operate in a void. Therefore, provided that the shower seat is tiled like the rest of the bathroom and all cable is covered by a cement-based flexible tile adhesive, then it is perfectly safe to install the heating on a shower seat.

What is the best Underfloor Heating system for my application?

If you are unsure which floor heating system best suits your needs or daunted by the many options and offerings on the market, Thermogroup's online underfloor heating system selector tool can help you make the best decision. Our underfloor heating selector takes you through a simple four step process to determine the most suitable underfloor heating system for your individual application then also lists out all the products required to get the job done, so you can be assured that you will have everything required when it comes to installation. If you have any requirements outside of those specified on the tool do not hesitate to contact us to discuss your requirements.

Try the Heating System Selector

Can Thermonet 200W/m2 be installed directly below the tiles?

Yes, absolutely. Although the Thermonet 200W system is designed to be installed beneath a screed, it is also perfectly safe to be installed directly below the tiles, as with the 150W system. Due that the higher wattage, the 200W system will heat up more quickly than the 150W system when installed directly beneath the tiles. If you desire a more on-demand system or have a high heat loss application, then it is best to use the 200W system directly below the tiles.

What is the difference between Thermonet 150W and Thermonet 200W, and which system should I choose?

The difference between Thermonet 150W and Thermonet 200W is simply the wattage per square metre, and the application for which they are used. The Thermonet 150W is designed to be installed directly under tile, just in the tile adhesive, whilst the Thermonet 200W is designed for installation beneath a screed as the higher wattage makes it more effective in heating through this screed. For a further comparison between the two systems, please view our article on which is more effective, or to determine which system is right for your application try our Heating System Selector.

Should Underfloor Heating be installed below or above the waterproofing?

To ensure a fully waterproof substrate it is recommended to lay the floor heating over the waterproofing. In a screed application, where the waterproofing is on top of the screed, an in screed system can be laid before the waterproofing.

What are the rough in or first fix requirements for Underfloor Heating and a Controller?

When roughing in for our Underfloor Heating and the controller, the electrician will first need to bring mains power to the Thermostat location. The electrician will then also need to run two 20mm conduits from the Thermostat position down to the floor, for the Underfloor Heating Cold Tail and for the Floor Sensor. For further information and a visual representation, please view our Conduit Requirements download.

Related Videos & Articles

Related Articles

The complete guide to underfloor heating

Electric vs. Hydronic Underfloor Heating

How energy efficient is electric underfloor heating?

How do I turn my underfloor heating on and off?

Videos

Planning Tools

Running Cost Calculator

Try our cost calculator to get an running cost estimate based on the size of your heating area and electricity tariff

Learn More

Quote Calculator

Use our simple to use quoting tool which will generate a quote for the supply of underfloor heating in a matter of minutes

Learn More