AC7510GTD Church Shape Polished Edge Mirror Glue-to-Wall including demister

W750xH1000xD5mm

$364.00 RRP

In Stock

The AC7510GTD Church Shape Mirror from our Aspen Range is made to fit your design, space and budget. These mirrors are backed by our 2 year warranty. The mirrors feature a commercial strength vinyl backing and is glue-to-wall. The mirrors are copper-free and edge sealed to ensure the mirrors does not develop foil creep on the edge.

The Church Shape Aspen Mirror Series features a 5mm silver mirror with a polished edge. The AC7510GTD mirror is 500mm wide and 800mm high.

The AC7510GTD includes a mirror demister which is a thin heating pad that is installed behind the mirror to prevent the mirror from fogging up. For more details on mirror demisters click here. Please note the mirror demister is not attached to the mirror but is supplied as two separate components.

 
Product Code
AC7510GTD
Output
46Watts
Warranty
2Yrs
Mirror Thickness
5mm
Mounting Method
Glue-to-Wall
Material
Silver Mirror
Edge Type
Polished
Orientation
Portrait Only
Approx Weight
5kg
PLEASE NOTE: Specifications are for information purposes only. Whilst every effort has been made to ensure the product specifications are accurate, due to continuing product development and improvement the specifications are subject to change. Specifications can be used to rough in and fit timber supports in the wall however we recommend no holes are drilled without having the product on site or verifying the details with the manufacturer. Thermogroup cannot be held liable or responsible for errors due to updated specifications.

What is best for cleaning mirrors?
For best results clean mirrors with methylated spirits and water at a rate of 30% methylated spirits and 70% water. Do not use Windex or similar chemical cleaning products. Avoid getting water on the sides or back of the mirror as damage to silver backing can occur. In coastal areas it is recommended to wipe around the edge of the mirror once a month to avoid salt build up that can cause silver creep.

How is the mirror fixed to the wall?
This mirror is supplied without hangers and is designed for glue-to-wall mounting. Adhere the mirror in position using a suitable mirror adhesive. The mirror adhesive selected must be compatible with mirrors and neutral cure as some adhesives can damage the mirror backing. It is recommended to use double-sided tape in conjunction with the mirror adhesive.

For more information, please view the specification sheet.

Submit A Review

Have you considered adding a demister?

Upgrade a standard bathroom mirror by installing a Thermomirror demister pad. The ultra-thin demister pad provides a clear and condensation free mirror even after a hot bath or shower.