Thermoslab In Slab Heating – Cable Only

Versatile In Slab Heating Cable

Thermoslab is a brilliantly versatile, robust 7mm thick underfloor heating cable designed for use In Slab. Install the cable in the concrete slab of new builds to create an energy efficient thermal mass under your floor. To work out which heating cable is required, multiply the Square Metres of your area by 160 to give the required output (Watts).

Choose a heating cable to fit your space

Thermoslab In Slab Heating Cables

Stock No.
3138
Length
10m
Output
300 W
Resistance
176.33 Ω
Price
$309.00
Stock Status
In Stock
Stock No.
3139
Length
20m
Output
600 W
Resistance
88.17 Ω
Price
$379.00
Stock Status
In Stock
Stock No.
3141
Size
30m
Output
900 W
Resistance
58.78 Ω
Price
$399.00
Stock Status
In Stock
Stock No.
3142
Length
37m
Output
1100 W
Resistance
48.09 Ω
Price
$479.00
Stock Status
In Stock
Stock No.
3145
Length
50m
Output
1500 W
Resistance
35.27 Ω
Price
$529.00
Stock Status
In Stock
Stock No.
3147
Size
60m
Output
1800
Resistance
29.39 Ω
Price
$599.00
Stock Status
Low Stock
Stock No.
3148
Length
67m
Output
2010 W
Resistance
26.45 Ω
Price
$669.00
Stock Status
In Stock
Stock No.
3152
Length
84m
Output
2500 W
Resistance
21.16 Ω
Price
$739.00
Stock Status
In Stock
Stock No.
3155
Length
100m
Output
3000 W
Resistance
17.63 Ω
Price
$829.00
Stock Status
In Stock
Stock No.
3156
Length
112m
Output
3350 W
Resistance
15.79 Ω
Price
$1,059.00
Stock Status
In Stock
Stock No.
3158
Length
134m
Output
4020 W
Resistance
13.16 Ω
Price
$1,179.00
Stock Status
In Stock
Stock No.
3160
Length
150m
Output
4500 W
Resistance
11.76 Ω
Price
$1,379.00
Stock Status
In Stock
Stock No.
3161
Size
170
Output
5100
Resistance
10.37 Ω
Price
$1,619.00
Stock Status
In Stock
Stock No.
3163
Size
185
Output
5500
Resistance
9.56 Ω
Price
$1,759.00
Stock Status
In Stock
Stock No.
3164
Length
200m
Output
6000 W
Resistance
8.82 Ω
Price
$1,899.00
Stock Status
In Stock

Accessories

Stock No.
3257
Description
Cable Ties
Size
140mm
Price
$9.50
Stock Status
In Stock
Allow 3 cable ties for every 1m of heating cable. Thermotouch manual thermostats are recommended for Thermoslab as this is typically connected to off peak power tariffs so you cannot have a programmable thermostat as it would lose its program during the 'off periods each day

Technical Data

Cable Thickness
7mm
Protection Rating
IP67
Warranty
Lifetime
Voltage
240Volt
Max. Temperature*
28C
Conductor Type
Single Ended
Cold Tail Length
5m
* Regulated by floor sensing thermostat

Frequently Asked Questions


Can I use my floor heating on "Off Peak" electricity?

When using in Slab Heating you can take advantage of the Off-Peak electricity tarrif as heating the slab creates a thermal mass beneath your floor that allows for a slow continuous release of heat. Under Tile and In Screed heating systems have a more rapid heat up and cool down time, therefore are not suitable to be used with Off-Peak electricity.

Can I join two or more heating cables or mats to fit a larger area?

No, the heating cables or mat cannot be joined together however two or more elements can be connected in parallel to one Thermostat. When connecting multiple cables or mats you need to ensure that the total load does not exceed the total load of your thermostat.

Can I cut the heating cable if I have excess?

No -never. Cutting the heating cable will alter the resistance and cause the element to overheat. If you cut the cable by accident please call our technical helpline for assistance.

How long does Underfloor Heating take to heat up?

Every situation is different due to the insulation value of your property, type of flooring used and the level of heating used below the insulation. An inslab heating system typically takes around 1-2 days to heat up and the same to cool down as it needs to heat the entire slab profile. Once it does heat up it becomes a very energy efficient way to heat as the slab acts as a heat bank, continuing to heat up through the room.

Is an Electric Underfloor Heating System possible with polished concrete floors?

When considering installing Underfloor Heating with a polished concrete floor, the answer is yes, this is possible! There are two options for how this can be done, using either our In-Slab or In-Screed System. Where a full slab is being poured and the surface polished, an In-Slab System can be used within this slab to heat the whole slab in a thermal mass. Alternatively, where a secondary slab is being poured and polished, then an In-Screed system can be used between the initial pour and the secondary slab, thus providing a more on-demand heating solution for your home. For further information, view our article on Polished Concrete & Underfloor Heating.

Related Videos & Articles

Related Articles

The complete guide to underfloor heating

Electric vs. Hydronic Underfloor Heating

Selecting the underfloor heating for your application

How do I turn my underfloor heating on and off?

Videos

Planning Tools

Running Cost Calculator

Try our cost calculator to get an running cost estimate based on the size of your heating area and electricity tariff

Learn More

Quote Calculator

Use our simple to use quoting tool which will generate a quote for the supply of underfloor heating in a matter of minutes

Learn More